Re: electric fan power source: switch battery position?

From: Alan Short (ashort@flash.net)
Date: Sat Jan 29 2000 - 19:15:25 EST


I hooked mine up to the + in the underhood fuse/relay tray. I like it hooked
up straight to the battery because it continues to cycle and cool after
shutdown.
I run a Optima battery, which works well too.It's never been weakened by the
fans.
Alan S.

"Pedro J. Diaz" wrote:

> I searched the archives for awhile and couldn't find the answer.
>
> on installing the electric fan, if the power comes straight from the
> battery, then the fan would run when the truck is off.
> the Perma Cool rep said to hook it up to the ' switch battery
> position'. I presume this is the wire that goes to the starter from the
> ignition key relay switch. does anyone know where this is in the post
> 97 Daks? I read a write up by someone who ran a wire to the inside of
> their cab and hooked it up to their fuse box to a switch that was only
> on when the engine is on, but there's got to be an easier way.
>
> anyone know?
>
> pjdmd



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:14 EDT