In a message dated 2/1/00 12:48:08 PM Eastern Standard Time,
Rich.Wisotzkey@gd-wts.com writes:
> I deleted the email before replying to it. I want to thank whoever it was
> that posted the wheel clearance deal from Summit. I didn't get any wheels,
> but I did find a 3-piece ASP underdrive pulley set also on clearance for
> $50.บบ. Not only was the price good, but the 3-piece set still retains the
> stock belt. Thanks again, the timing was perfect.
> Rich - Ashburn, VA
Rich
I had the 3 piece set on but went back to the stock alt pulley and thus a
different belt. Not enough charging at idle or low RPM with the ASP alt
pulley. I think Jon may have used stock alt pulley also. Then we had to go
with a 6 rib belt as couldn't find a 7 rib to fit. Another note would be to
be very careful with stock belt or any belt for that matter and your alt
pulley hitting the radiator over flow bottle (92 -96 anyway) as engine roll
will put a nice hole it it for ya. I tried the ASP alt pulley but to low or
no charge at idle and with the headers if you high idle they will get red hot
and mealt things.
Just my 2 cents
Bill
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:51 EDT