Hey Guy's and Gal's when we swap the seats in our Dak I help Lynn with
the labour, I give her the instructions on what to do and select the
radio station. Got to have music when I'm working hard!!! Right Guy's???
Dave Waco
Lynn Pedersen wrote:
>
> Kyle, Hi! On our 94 Dak Sport we change from buckets to bench ever
> winter and spring. The reason being it's not so hard sliding in and out
> in the cold weather on the bench wearing winter coats. There are all the
> self tapping holes in the floor you need for either set of seats
> including center consul. Also don't forget to change your seatbelts too.
> You will need 2 extra bolts for the buckets. It's an easy swap. I do the
> labour because Dave is too lazy! LYNN PEDERSEN
>
> Kyle Kozubal wrote:
> >
> > I might soon be swapping out my bench seat for some buckets. I have never
> > unbolted my Dak's seats so I have some questions. Dont laugh now(too hard),
> > as some of these questions might be basic knowledge to some. First, the
> > seats are mounted onto the seat rails. Are they just bolted onto these
> > rails? Is the hardware for these common bolts/nuts are am I only going to be
> > able to get them at the dealer? The rails then are what the seat slides back
> > and forth on and these rails are 'bolted' to the floorboards, correct? Are
> > the bolts which bolt the rails to the floorboard common hardware or an
> > dealer only item? Also, concerning the bolts/hardware which actaully attach
> > the seat rails/mounts to the floorboards.....are they just like self tapping
> > bolts or how do they work? Will I need to buy some type of speednut or
> > anything for the bolts to securely fasten to the floorboards? Thanks for any
> > and all info on this
> > Kyle
> > 93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:58 EDT