Re: Cams?

From: Jon Smith (fast4x4@bellsouth.net)
Date: Tue Feb 15 2000 - 00:20:26 EST


$420?? Dave Hughes quoted me $230ish for one of his cams... can't remember
the specs on it right now tho...
___________________
Jon Smith--Raleigh, NC
   95 CC 318 4x4 auto
      15.4@89.5mph
fast4x4@bellsouth.net

----- Original Message -----
From: Jeremiah Siembida <hemimopar426@hotmail.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, February 15, 2000 12:04 AM
Subject: DML: Cams?

> Mike,
> That Mopar cam P5249549, I quoted is 419 bucks from Mancini Racing
> (1-800-843-2821)
>
> Also, if you didn't get the 2000 MPP catalog, your 97 Dak has a puter for
a:
> *auto trans, unless noted*
> 4x2 *Cal. emissions*: P4876262
> 4x4 Federal emissions: P4876486
> 4x2 Manual Trans: P4876261
> These are all for the 97 5.2L. I am going to try a MP computer for my '96
> first, as it's only $260 from Mancini.
> Summit has it, but wants $325 for it. Check around, you should be able
to
> get that stuff cheaper.
> I am in North Dakota, and NOTHING is cheap here, so I shop around.
>
> In my engine, do I have stock roller lifters? Should I get new ones?
> I went to Comp cams,a nd Crane Cames websites,a dn ordered free catalogs.
I
> also got Edelbrock, I think.
> I'll look that up. I want a hi-performance cam, and low maintenance. I
am
> new to the hobby,a nd am learning. Adjusting valve
> lash every 300 miles would get old. That's mechanical cams, correct?
> Roller cams shouldn't need any
> maintenance, right?
>
> Thanks for the input.
> Black '96 Dak Sport CC 4x4, V-8 Magnum
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:07 EDT