In a message dated 2/16/00 12:41:09 AM Eastern Standard Time,
durling@attglobal.net writes:
> we'll it looks like I found out what was causing the shaking problem in
> the front-end. I've mentioned the sway-bay end links are about trashed
> but they are starting to get worse and you really notice it when you
> corner. The truck now takes bumps really hard compared to a week ago. I
> didn't think this would do this but the more I think about it it makes
> sense. To make sure i'm going to replace the crappy front rotors while
> i'm at it (see other post) so if it's still there i'm lost. It's
> definately not the shocks since they are brand new and they are not
> leaking. Besides the truck would be really mushy in the front not kinda
> harsh.
>
> Jeff Durling
> '96 RC Sport - 31
Go the whole route & get the oversized bars from Bell Tech or Hellwig.
Reasonably priced and make a world of difference. They come with polyurethane
bushings as well.
Kelly in SC
'96 CC 5.2
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:07 EDT