I didn't have to destroy that little plastic piece when I removed
mine. I just pushed the blade of a screwdriver under it and flipped
it off. The surrounding plastic is kinda soft, so you can push into
it, no harm done.
Flip
---- Begin Original Message ----
From: ZeNel1eac1@aol.com
Sent: Tue, 22 Feb 2000 09:16:15 EST
To: dakota-truck@buffnet.net
Subject: Re: DML: Manual Shifter
The only shifters i've found require some pretty major customization.
but as
far as the nob goes you have to pull that little shifter locator
picture
thing off of the top to reveal a screw you almost definitely will
have to
destroy that little plastic piece so be sure you want to do it.
Joe G.
98 black sport plus 318 5spd 4x4
<< Are there any aftermarket shifters for the 5-speed available?
I'd like to get a shorter throw.
Also, is there a way to remove the "knob" on the stock shifter? I
haven't really tried, but it seems as though thats there for good.
I'd
like to put a different one there.
Also, while I'm at it anyone here have the 2.5L engine in their
truck?
John Daigle
'98 Dakota
>>
---- End Original Message ----
http://www.care2.com - Homebase for people who care about the Environment!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:35 EDT