really?? wow.. my 97 cc slt feels like it turns on a dime.. seems it turns
just about as well as my Probe did, which was pretty good
Ken Allgood
----- Original Message -----
From: "Bob King" <k85go76@erols.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, February 27, 2000 9:36 PM
Subject: Re: Re[2]: DML: r/t wheels on a '96
> Good point. My '95 CC SLT turns like a freight train!
> Bob King
> Pennsville, NJ
> -----Original Message-----
> From: Michael Clark <magnumv8@wtez.net>
> To: Mag318Racr@aol.com <dakota-truck@buffnet.net>
> Date: Sunday, February 27, 2000 2:33 PM
> Subject: Re[2]: DML: r/t wheels on a '96
>
>
> >Sunday, February 27, 2000, 7:32:34 AM, you wrote:
> >> Look for turning radius problems if and when you lower it. Everyone who
> has
> >> dropped their truck has lost some. I don't know how much with only an
> inch of
> >> drop but I lost close to an inch with a 2 inch drop using spindles.
Just
> >> passing on info FYI.
> >
> >
> >Jeeze! I can't imagine loosing any turning radius on a Gen II dak.
> >It takes several acres as it is....
> >
> >--Mike
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:53 EDT