>>No can do. Not enought vacuum to run the crate motor with fuel
injection<<
it can be done, however it's very expensive and a big project. Dave
raises a good point with the Vacuum thing. (go Dave!)
the Cam is too radical for the computer, you'd have to rig up all the
sensors and stuff. There is no pollution control on the crate engines,
and they are not drilled for injectors, so you'd need to buy that
manifold. If you spend enough $$$ then you'll be able to pull it off...
=(
may be better off finding a magnum 360 at a boneyard (ANYWHERE BUT BRUCE
AUTO PARTS!!)
-mike d.
---> Yorktown, Va.
"PROJECT 13's" ... slammed 88 Dakota gettin' a Magnum 360!
miggitymike@juno.com
http://members.xoom.com/dakotaperf/index.html
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:32 EDT