you can run it with the factory computer. All that happens is on a speed
density system if there isn't enough vacuum pulling through then the
computer goes nuts and won't run. However for a little money you can install
a vacuum canister and a hook up a system that will allow it to idle and run.
----- Original Message -----
From: mike d. <miggitymike@juno.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, March 07, 2000 1:35 AM
Subject: Re: DML: Question on Crate's
> >>No can do. Not enought vacuum to run the crate motor with fuel
> injection<<
>
> it can be done, however it's very expensive and a big project. Dave
> raises a good point with the Vacuum thing. (go Dave!)
> the Cam is too radical for the computer, you'd have to rig up all the
> sensors and stuff. There is no pollution control on the crate engines,
> and they are not drilled for injectors, so you'd need to buy that
> manifold. If you spend enough $$$ then you'll be able to pull it off...
> =(
> may be better off finding a magnum 360 at a boneyard (ANYWHERE BUT BRUCE
> AUTO PARTS!!)
>
> -mike d.
>
> ---> Yorktown, Va.
> "PROJECT 13's" ... slammed 88 Dakota gettin' a Magnum 360!
>
> miggitymike@juno.com
> http://members.xoom.com/dakotaperf/index.html
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:33 EDT