Hey Mark!
keep in mind that these cam figures are safe for a CARBED motor, but your
TBI motor's computer will not accept any of these cams....
been there... done that... =(
-mike d.
---> Yorktown, Va.
"PROJECT 13's" ... slammed 88 Dakota gettin' a Magnum 360!
miggitymike@juno.com
http://members.xoom.com/dakotaperf/index.html
On Tue, 21 Mar 2000 17:27:03 PST "A. S." <adakota4x4@hotmail.com> writes:
> Mark:
> Here's the response--
> "Your 4x4 Dodge Dakota's drivetrain is more than adequate. Use
> Mopar's
> 260/268 degree .430-.450-inch lift cam #P4552810 with their
> valvesprings
> #P4120249 and chrome alloy retainers #P4452033. Mopar has a good
> aluminum
> four barrel manifold #P4452114, along with a Holley 650 cfm Double
> Pumper
> carburetor #0-4777. With the heads, install Mopar's 360 stainless
> replacement valves 1.88-inch intake #P4876397, 1.60-inch exhaust
> #P5249187.
> Then open up the bowls to the bigger valve seats, port match, and do
> a good
> three-angle valve job. Mill them at .030-inches to get the
> compression up.
> Next, Mopar has headers for your 4x4 Dakota #P4529478. This
> combination
> will make 200 horsepower easy. Have fun!"
>
> Hope this is what you were looking for!
> --Aaron--
> 95 DSRC 4x4 V6
>
>
> >From: "Mark Pryer" <mark_pryer@hotmail.com>
> >Reply-To: dakota-truck@buffnet.net
> >To: <dakota-truck@buffnet.net>
> >Subject: DML: Mopar muscle article needed
> >Date: Tue, 21 Mar 2000 11:41:44 -0800
> >
> >Does anyone still have that Mopar Muscle magazine that had the "Six
> Appeal"
> >article in it? If so can I ask a favor. In the back it has reader
> >questions in it and someone asks about adding hp to a premag. The
> editor
> >listed several parts and #s of cams and valve springs and stuff.
> Can
> >someone post that response please? It would be much appreciated
> >Mark
> >91 cc 5spd 6er Dynomax catback 14x3 K&N
> >
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:55 EDT