Don't see why it wouldn't. Only thing to check is the neck opening...should
be the same for our TB's.
- Bernd
----- Original Message -----
From: "Kyle Kozubal" <grndak4x4@home.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, April 01, 2000 3:55 PM
Subject: DML: Re: Dual Snorkle Breather on V6?
> > In the local paper:
> >
> > 340 Dual Snorkle Breather, complete, off Challenger. $50
> >
> > Could this work on a V6?---possibly with minor modifications? Maybe
make
> it
> > into a ram air setup?
> > Thanks
> > --Aaron--
> > 95 DSRC 4x4 V6
>
> I would say it should fit, depending on how tall and wide the filter
housing
> is. This is probably similar to what I am running now:
> -Removed the 'air restrictor plate' at the grill for the factory cold air
> duct
> -Added an Amsoil 2Stage Hi-Flow Air Filter
> -Tornado Air Management System, dont laugh.....I got suckered into it
about
> 3 years ago, it hasnt done anything help my truck, but I just like to say
I
> have one :)
> -Grafted in a second factory cold air intake duct, using a 4" duct. I
bought
> a stock air filter housing(round type from a GenII Dak) and cut out the
> 'neck' and part of the metal round housing which connects the cold air
duct
> to the filter housing. The part I cut out just is the area around the
> housing's duct 'neck'. I then cut a hole the size of the neck and slid the
> neck and metal housing over this hole in my filter housing, sealing it up
> with clear silicon and 4 stainless steel screws. I then ran the factory
air
> duct(which I also got with the housing I bought) and connected it to a 4"
> duct, which I bought at PepBoys and ran this duct to the grill, right
about
> the factory air duct. If you look, there is a second rectangular hole in
the
> grill right above the rectangular hole the factory air duct uses. I
mounted
> another neck, same as the one on the factory duct, and popped it into the
> hole. Dual cold air intake ducts with an awesome factory look.
> -I sealed up all connections with clear silicon RTV, so no cold air
escapes
> I noticed a really good overall increase in gas mileage and acceleration
at
> any RPM is alot better. I have a QuickD TB on order, so this should really
> help all my air intake mods.
> Kyle
> 93 Dakota 4x4 V6
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:35 EDT