On Tue, 4 Apr 2000, Hausheer, Geoffrey wrote:
> After talking to Ted O. (Thanks!) sounds like I should be thinking about a
> new intake manifold for my Dak. I checked out mopar performance, and they
> have what looks like 4 or so Manifolds that would go on my truck (and at
> least two are labeled as 'm1' with prices ranging from $230 to $1000)
> Anyone have a part number (or price) for a single-plane Mopar Performance
> manifold that will bolt on to my '98 318?
The only intake that will bolt on to our daks is the single plane
"MPI" manifold. The part number is P5249816. In actuality, you will
need a few extra pieces to make it work, as MP doesn't include everything
you need. If you have A/C, you will also need to grind off a corner
of the compressor. There's an install guide here:
http://www.cs.fredonia.edu/~stei0302/www/dakota/upgrades/mpi
As far as the extra pieces go, you can either purchase and
fabricate them yourself, or I have a kit available which
includes the extra stuff. (http://www.dakota-truck.net/mpi)
I got my MPI from Koller Dodge for about $206; $220 after shipping
about a year ago. (http://www.kollerdodge.com or
http://www.worldparts.com/kollerdodge)
-Jon-
.--- jon@dakota-truck.net -- or -- stei0302@cs.fredonia.edu ------------.
| Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
| '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
`---------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:36 EDT