RE: skid plate installation on '95

From: Norah Bleazard (nbleazard@home.com)
Date: Thu Apr 20 2000 - 15:01:06 EDT


Hi Aaron,

Thanks again. If you're going to check it tomorrow, can you send the e-mail
to Jon Steiger's e-mail address: mailto:jon@dakota-truck.net as we'll be
there tomorrow. We'll be installing the Swampers as well :) <very big
grin>. Hopefully we'll be done in enough time to do a little offroading
around Jon's. :) Probably leaving here around 5:00 or 6:00am tomorrow.

BTW, where are you located seeing as you get Good Friday off? Funny, it's
not a stat holiday in Utah, but it sure is in all of Canada. :)

TTYL,
Norah
current: '98 Dakota Sport black 4x4 CC V8/5.2L/Auto
current: '95 Dakota Sport white 4x4 Reg Cab V6/3.9L/5spd
RIP: '95 Dakota Sport black 4x2 CC V6/3.9L/Auto
previous: '93 Dakota blue 4x2 CC V6/3.9L/Auto

> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of A. S.
> Sent: Thursday, April 20, 2000 9:33 AM
> To: dakota-truck@buffnet.net
> Subject: RE: DML: skid plate installation on '95
>
>
> Ok, that's what I'll look for then. I might get to it tonight.
> If not, I
> will tomorrow--don't have to go to work since it's good Friday.
> I'll let you
> know.
> --Aaron--
> 95 DSRC 4x4 V6
>
> >From: "Norah Bleazard" <nbleazard@home.com>
> >Reply-To: dakota-truck@buffnet.net
> >To: <dakota-truck@buffnet.net>
> >Subject: RE: DML: skid plate installation on '95
> >Date: Thu, 20 Apr 2000 08:37:23 -0400
> >
> >Thanks very much Aaron,
> >
> >The bracket I'm talking about is the triangle shaped one that
> has two nuts
> >welded on to it. These two nuts are the ones causing me grief... I just
> >don't want to force it and accidentally strip them. Thanks again.
> >
> >Norah
> >current: '98 Dakota Sport black 4x4 CC V8/5.2L/Auto
> >current: '95 Dakota Sport white 4x4 Reg Cab V6/3.9L/5spd
> >RIP: '95 Dakota Sport black 4x2 CC V6/3.9L/Auto
> >previous: '93 Dakota blue 4x2 CC V6/3.9L/Auto



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:50 EDT