32mm or close, I use a socket for the top one, a 12" adjustable wrench when
I don't have a socket big enough handy... yes, fluid should be even w/ the
bottom of the fill hole
----- Original Message -----
From: A. S. <adakota4x4@hotmail.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, April 24, 2000 10:12 PM
Subject: DML: Transfer Case Questions
> Anyone know what size the fill plug is on the NP231? Wanted to remove it
to
> check the fluid level and didn't have a socket big enough. Fluid level
> should be even with the bottom of the fill hole when cold, right?
> Thanks for any and all help!
> --Aaron--
> 95 DSRC 4x4 V6
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:54 EDT