At 10:00 AM 4/25/00 -0400, you wrote:
>Ya know what has really got me baffled is I measured the resistance on the
TPS
>before I took voltage readings and the resistance overloads my Fluke at
WOT...
>Using ohms law (V=IR) shouldn't the signal voltage approach the input voltage
>(approx. 5v) as R takes the big jump towards infinity at WOT?? What's in the
>TPS that's stepping down or holding back the voltage?
As far as I've read, Tom, it's a potentiometer with closed tb plate position
close to 0.5v resistance and, at WOT position, just a little resistance.
Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:54 EDT