RE: SciTeck-twin turbos

From: Stlaurent Mr Steven (STLAURENTS@mctssa.usmc.mil)
Date: Thu Apr 27 2000 - 10:45:43 EDT


Ok Kuk! I told you not to use NASA's mainframe for any number
crunching......<chuckle>

-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
 <<...>> <<...>>

 -----Original Message-----
From: Shari & Marty [mailto:msdng@netzero.net]
Sent: Wednesday, April 26, 2000 10:06 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: SciTeck-twin turbos

Crunching some numbers for you, a stock Magnum 318 that has the stock 5250
rev limiter
makes 383 horse at 4300 rpm with 10 psi. Port the heads and feed them with a
cam to 5800 rpm, headers, will raise that figure to 476 horse at 4800 rpm.
Your 5 speed with a centerforce clutch will lose 8-9% and make either 350 to
the rear on the stock setup above and the modified setup with the same
clutch will make around 434 to the rear.
Kuk

> Well I'll show an interest if someone could tell me what their
aproximations
> of HP and Torque increases are on the 318's
>
> Joe G
> '98 Black sport plus 318 5spd 318 4x4

_____________________________________________
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://www.netzero.net/download/index.html



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:58 EDT