Re: Dyno Results

From: TEDSDAKOTA@aol.com
Date: Sun May 21 2000 - 09:01:59 EDT


In a message dated 5/20/2000 7:40:16 PM Pacific Daylight Time,
therrin@isaac.net writes:

<< With the addition of the Mopar PCM, 1.7 roller rockers, and ASP crank
 pulley since my dyno run last year, I gained 10hp at the peak 4200rpm.
 I gained 18hp at 5000rpm. I definitely gained more on the top end. I
 also gained 25 ft-lbs at the torque peak of 3200rpm.
 
 Also of note, back to back dyno runs with and without the MSD 6A
 ignition and Blaster SS coil showed a gain of 3hp at the peak 4200rpm.
 There was a maximum gain of 10hp at 3200rpm. So despite what some
 say, I have proof that the MSD ignition does improve performance.
 Nothing dramatic, but it's not a complete waste of money and effort.
 
 Terry Herrin
 99 FR CC R/T
 14.769 @ 91.43
 Wilmington, NC >>

    Thanks for the info, great job...

                        Ted O.
                    99 SLT + 4X4, 318 ci,



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:21 EDT