the 484hp is an estimate at the flywheel. I think also that it is kinda
high, but it's gotta be making some power. I just put the weight and e.t.
in the calculator and that's the #'s it kicked out. rear wheels was
373.07hp. with the stock converter and only 3.90 gears it has run 12.56 @
109 mph. here's some specs on the engine.
360 bored .030 over
Eagle rods
ross racing pistons
Edelbrock aluminum heads
Crane roller rockers
MP .528 lift cam
MP M1 intake
Holley 750 carb
all MSD ignition
ttyl
Scott Miller
89 Shelby Dakota #322 - 5.9 V8 12.56 @ 109.40
94 Dakota Sport - 3.9 V6 5-Speed (15.86 @ 84 mph)
----- Original Message -----
From: christine lauret <christinelauret@hotmail.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, June 18, 2000 10:51 PM
Subject: DML: 484 HP SHELBY?
> This question is for Scott with the 360 shelby. I was just interested in
> knowing what engine combinations you have done with your 360 to get the
> estimated HP of 484? I don't want to doubt you at all but to get horse
power
> above above the total cubes of the engine gets really expensive. My '71
340
> is around 400 at the crank and I can run constant low 13's...I don't know
> man...If you have as much as you say you do, all the power to ya!
>
> Jeff P
>
> 87 '71 340 Blue Dakota
> 727 W/2000 Stall Hemi Converter
> Stage II Shift kit
> Dynomax 2 1/2" True Duals
> 3.55 SG
> Mopar or Nocar!
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:49 EDT