Re: Re[2]: stalling problem

From: Bob Tom (tigers@bserv.com)
Date: Mon Jun 19 2000 - 19:17:29 EDT


At 03:57 PM 6/19/00 EDT, you wrote:
>It does it at all times...cold-warm-idle-55mph.The battery cables and
>connections are fine cuase i tried that.Today when i went to go see what was
>wrong with it cuase it diedat the us1 hwy40 interchange.I first tried to
>crank it and starter runs but motor doesnt even try to turn over.I make sure
>the coil wire is plugged in bothe ends and try agian...same thing.I unplug
>the connector at the bottom of the coil and plug it back in and it tries to
>turn over for a moment.I unplug and replug it agian and it starts.I have
>checked the coil and as far as the hayes manual says it is within specs.I
>guess im gonna have to try switching coils with my truck...i tried once but
>could not get the screws off mine.If this doenst work i guess if its not too
>complicated ill try the sensor in the tb.

Just a thought. Have you checked or replaced that wire that you
connect/disconnect?

Bob



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:49 EDT