In a message dated 6/21/00 11:21:35 AM Central Daylight Time,
flyboy01@mediaone.net writes:
<< If you are doing a Magnum swap, you need a new flexplate and converter from
Mopar, they do make a performace flexplate P4876705 (706) especially for the
360 magnum. The 360 is an externally balanced engine and unless the torque
converter is already balanced for the 360, you need to add the p5249843
weights. The 518 is the same as the 727 trans with an extra gear (OD) and
will work with those converters.
Mark Kuzia >>
The mopar flex plate will work for balancing the motor. It will not work in
your truck due to the crank position sensor. Use the weight kit from Mopar,
if your using the neutrally balanced TQ conv, from a 318. The kit is cheap
and directions are easy. This will allow you to use the old flex plate to
accomodate the EFI. This is the way I did my 318 to 360 swap.
Tom(11s dak)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:51 EDT