Re: Problem here *update*

From: Jon Smith (fast4x4@psy.digivill.net)
Date: Thu Jun 22 2000 - 23:26:12 EDT


Mark, do you have a large (heavy) key-ring?

-- 
Jon Smith
Raleigh, NC
fast4x4@digivill.net
www4.ncsu.edu/~jdsmith4

BellSouth SUCKS!!!!

On Thu, 22 Jun 2000, Mark Pryer wrote:

> Ok Here is what happened...Apparently the ignition switch got damaged > somehow and part of it broke off on the rear of it. It is supposed to look > like a C and now it looks like a U. This in turn made it so that it would > not send any power to the starter. Very strange, never heard of that > breaking. Oh well, add it to the list. > Thank you to all who responded. > Mark > ----- Original Message ----- > From: Bob Tom <tigers@bserv.com> > To: <dakota-truck@buffnet.net> > Sent: Thursday, June 22, 2000 7:43 AM > Subject: Re: DML: Problem here > > > > At 11:37 PM 6/21/00 -0700, you wrote: > > >Ok here's the deal. my truck won't start. Won't even kick over, but the > > >lights and radio still work. It is not the coil or the starter or any > fuses > > >pretty sure it is not the battery, but won't know for sure till I have it > > >tested. What else could it be? anyone? > > >Mark > > > > See if you can get someone to check out the cam position sensor. > > > > Bob > > >



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:52 EDT