No not really just 3 keys on it. Truck and house.
Mark
----- Original Message -----
From: Jon Smith <fast4x4@psy.digivill.net>
To: <dakota-truck@buffnet.net>
Sent: Thursday, June 22, 2000 8:26 PM
Subject: Re: DML: Problem here *update*
> Mark, do you have a large (heavy) key-ring?
>
> --
> Jon Smith
> Raleigh, NC
> fast4x4@digivill.net
> www4.ncsu.edu/~jdsmith4
>
> BellSouth SUCKS!!!!
>
> On Thu, 22 Jun 2000, Mark Pryer wrote:
>
> > Ok Here is what happened...Apparently the ignition switch got damaged
> > somehow and part of it broke off on the rear of it. It is supposed to
look
> > like a C and now it looks like a U. This in turn made it so that it
would
> > not send any power to the starter. Very strange, never heard of that
> > breaking. Oh well, add it to the list.
> > Thank you to all who responded.
> > Mark
> > ----- Original Message -----
> > From: Bob Tom <tigers@bserv.com>
> > To: <dakota-truck@buffnet.net>
> > Sent: Thursday, June 22, 2000 7:43 AM
> > Subject: Re: DML: Problem here
> >
> >
> > > At 11:37 PM 6/21/00 -0700, you wrote:
> > > >Ok here's the deal. my truck won't start. Won't even kick over, but
the
> > > >lights and radio still work. It is not the coil or the starter or
any
> > fuses
> > > >pretty sure it is not the battery, but won't know for sure till I
have it
> > > >tested. What else could it be? anyone?
> > > >Mark
> > >
> > > See if you can get someone to check out the cam position sensor.
> > >
> > > Bob
> > >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:52 EDT