RE: Milodon Gear Drive - Final Notes

From: Bernd D. Ratsch (bernd@texas.net)
Date: Fri Jun 23 2000 - 21:16:43 EDT


I put a few dollars aside every paycheck for the "Dakota Slush Fund".

(Currently putting a little bit extra aside for the "Dakota Blower Fund".
;)

- Bernd

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Dester223@aol.com
Sent: Friday, June 23, 2000 6:52 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Milodon Gear Drive - Final Notes

Really, Bernd... where do you get all the money to do this "trail and error"
runs on your truck? As I know, you've gone ahead and done the NOS, the
intake, heads porting? and basically everything else that can be done to
the
v6 engine, you've done it... Where do you get the $$$? if you've got that
much left over, send it over here! hehe.
-Dester

<< If you're interested in one for your Magnum, they work. If you don't
like
a
 gear/jingling noise (whining) then these are not for you. Between the
 Dbl-Roller Chain and the Gear Drive...well, it's personal preference.
 Eventually, I'm probably going to put the chain back in. (The noise gets
 annoying after a while in stop and go traffic.)

 Regards,

 - Bernd >>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:52 EDT