thanks i guess ill try bofore work i dont have to be there
till 2 its great bing just 16 hehe
\
Dester223@aol.com wrote:
>
> My, those chevies ARE easy tho. 4 bolts, a fan, and 1/2 of their removable
> fan shroud. Ah... other companies should really adapt the 1/2 fan shroud. it
> REALLY helps in removal of the fan.
>
> As for your dodge, it should be about the same amount of work.
> remove fan.
> fan shroud.
> drain the petcock from the radiator,
> loosen the lines that connect to the water pump,
> take out bolts that connct water pump. and it SHOULD pull right out. I
> don't believe there's an obstruction that would keep you from taking it out.
> clean up the gasket area, put new gasket on the water pump
> (I'd use a gasket adhesive. it's a glue that you apply from a spray can.
> Very nice stuff.. )
> line up bolts, and put back together. Should be about a 2 hour job if you're
> doing it by hand...
> -Dester
>
> Ps. don't rely on this info. I have a 97 dakota, but I believe the design is
> the same...
>
> << my pump went out on me today i have to replace, is there any trick to it
> or jsut pull everything apart to get to it? I have never changed one
> before and my dad has only changed them on chevy's he's always been
> a chevy guy.......
>
> 93' sport cc v6 4x4 >>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:32 EDT