Kyle,
That's a pretty good price. My bed cost $375 for over the rail.
-Mike Brown
Pasadena, MD.
97-Dakota Club Cab,5.2L, 4X4, 7" Lift, 35"x12.50" BFG A/T.
http://www.geocities.com/mbrowwwn/index.html
-----Original Message-----
From: Kyle Kozubal [mailto:grndak4x4@home.com]
Sent: Tuesday, July 11, 2000 11:13 PM
To: dakota-truck@buffnet.net
Subject: DML: LineX Estimates for Body
Well I stopped by the LineX dealer(same one which sprayed my Grill/Brush
guard, ran me $125) to get an estimate to have the lower 8" or so sprayed
with LineX. I would have the LineX sprayed upto the 'crease' which runs
along to body and all the way down to the rocker panels, or basically where
the body ends.
If you look at these pics,
http://www.bastaards.org/dakota/Kyle/Side%20Shot%202.jpg
http://www.bastaards.org/dakota/Kyle/Side%20Shot.jpg
........you can see this creased area of the body, which runs behind the
front fender flare on the cab all the way to the rear fender flare on the
bed, and then starting back up on the rear bed body portion, behind the rear
fender flare. I would remove the rear bumper and have to lower bed corner(s)
sprayed. Total price to have both sides sprayed is $275. I am serisously
going to consider having this done.
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:36 EDT
