I've seen ads from FlowCooler for a SB Mopar Water Pump.
- Bernd
----- Original Message -----
From: <brian.duffey@intelsat.int>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, July 12, 2000 8:33 AM
Subject: DML: Aftermarket/Performance water pumps
>
> Anyone (Gen II, Daks especially) running an aftermarket/performance
(higher
> flow) water pump?
> If so, what brand?, and have you been happy with it?
>
> I'm going to have my local shop replace my timing set with a performance
> chain & gears from Hughes, and since they'll be into it anyway, thought
I'd
> go ahead and put on a new water pump to.
>
> Last question... if replacing the OE pump with a new higher flow rate
pump,
> will I need to replace the hoses for the cooling system as well? (will a
> high flow pump increase the system pressure to the point where I should
> worry about the 'standard issue' hoses?). Most of the cooling system hoses
> have been replaced in the past 2-years, so they are in pretty good shape.
>
> Thanks for any comments...
>
>
> Duff
> '95 SLT 4x4 CC 318 4spd/OD - 3.55 LSD
> MSD 6AL - MSD Blaster Coil
> MSD 8.5 wires - K&N FIPK - F&B Stage I TBI
> Mopar HiPo Comp - Thorley Headers - Gibson Catback Exhaust
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:36 EDT