Re: Re DML R/T has no power

• Next message: Sam Parthemer: "RE: Tree Sap Removal"
• Previous message: Bob Tom: "R/Ts in 2000 DML Calendar"
• In reply to: BASURGOOD@aol.com: "Re DML R/T has no power"
• Next in thread: Bob Tom: "Re: Re DML R/T has no power"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

given that there are always other variables added in, but 46hp... well
that's roughly 0.5 sec in the 1/4 (10hp per 0.1sec)

-- 
Jon Smith
Raleigh, NC
fast4x4@digivill.net
www4.ncsu.edu/~jdsmith4
BellSouth SUCKS!!!!
On Wed, 19 Jul 2000 BASURGOOD@aol.com wrote:
> no its not a purple cam in my r/t , that was my  mistake. The cam i used was 
> the magnum r/t cam pt No. P5249549  and it was installed at a local Dodge 
> dealership.
> Does the r/t not come with a factory cat-back system?
> And how would i know if i had a bad cat ?
> My air cleaner is an edelbrock  10x3" open air element . Is that adequate ?
> I am running on stock tires and my time before the mods was 15.8 sec and 15.3 
> after.  There should have been better gains for that kind of money.
> Dodge advertises 46 hp and 51 lbs of torque with these add on's .
> 
> Mods :
> 
> headers 
> camshaft
> edelbrock open air element 
> jet chip
> T.B
> 
> B.Smith  1999 slow R/T cc
> 

• Next message: Sam Parthemer: "RE: Tree Sap Removal"
• Previous message: Bob Tom: "R/Ts in 2000 DML Calendar"
• In reply to: BASURGOOD@aol.com: "Re DML R/T has no power"
• Next in thread: Bob Tom: "Re: Re DML R/T has no power"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:43 EDT