Alex,
I used a 90' bend rubber pipe fitting from ( I hate so say at this point
hehe) Home Depot. Its a snug fit but works out just fine. About mounting the
filter, I used a mounting bracket that came with a radio. I drilled a hole,
used a nut & bolt on the PVC pipe and then used the mounting bolt & nut for
the OEM air filter box. Its not the best looking but it's doing the job.
There a photo on my web site. Here the link to K&N upgrade page..
http://geocities.com/maldbnsf/K_N.html
Have fun ;}
Don Mallett
Fort Worth, TX
<A HREF="http://www.geocities.com/maldbnsf/">www.geocities.com/maldbnsf</A>
'00 QC 4x2 SLT+, 4.7L, 3.55 rear, 4 speed auto, H/D Service Group, K&N home
brew air filter w/ Cool-rap, Cat back Flow-Pro Dual System, Mobil 1 Oil &
Gear lub., Oil cooler, 180 T-stat, Tonneau cover, Autolite 3923 plugs,
Cool-rap of the A/C Pipes, Radiator Bug Screen.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:16 EDT