In a message dated 08/04/2000 6:43:28 PM EST, steve318@webtv.net writes:
<< 1)Can I spray penetrating oil down around the plug first and
let it soak in,then try it? Bad idea?
No. Good idea.
2)Should the engine be cold,warm,or very warm when I try to pull `em?
Warm for iron heads and cool for aluminum heads but you can crack them warm.
3)Some of you have had them break on you.Anything to do or watch for if
that happens?
Don't break too many knuckles.
I don`t want porcelain and metal bouncing on my pistons! >>
Once they are cracked you can blow out any debris by mouth
or compressor.
Good luck,
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:17 EDT