I haven't actually done this, but I have seen it on a
local GenII. It was a 4X4 and had 31's on the rims.
Looked good. I was interested in the thought for a
while, so I asked the guy. He said that he had no
problems. Hope that helps.. Seth
--- Kyle Kozubal <grndak4x4@home.com> wrote:
> I am sure someone has tried this, and am just
> curious how it turned out.
> My truck has the stock 15x6 rims with 5 1/8" of
> backspacing. The rims I have
> in questions are the 15x7's, used on GenIII Dakotas
> and Durangos also have
> a 5 1/8" of backspacing. So other than being 1"
> wider, these rims should be
> a near perfect swap, right?
>
> My girlfriend has a 2000 Durango 4x4 with the 15x7
> rims(LT235 tires also),
> and I am going to swap her tires onto my truck one
> day, just to make sure. I
> have found a cheap set of these rims, and might go
> for them so I can run a
> slightly wider and taller tire. Any thoughts?
> Kyle
> 93 Dakota 4x4 V6
>
>
__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:21 EDT