Fog lamps on with high beams

• Next message: Pilot.dog: "Intro, and a question or two"
• Previous message: Alex Harris: "RE: Poboy Intake; Filters, Parts, and Such"
• Next in thread: Tim J Koth: "Fog lamps on with high beams"
• Maybe reply: Tim J Koth: "Fog lamps on with high beams"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hey all... here's a tech note I found on the fog lamps/high beams mod, and
the link.

FOG LAMPS ON WITH HIGH BEAMS

This is a fairly simple, 5 minute procedure. First, you must remove the
black plastic dash frame. It just snaps out. Then, remove the 3 screws
holding the headlight switch in and remove the switch. There are 2
connectors on the back of the switch.. A 2-wire connector and a multi-wire
connector. The 2 wire connector has a BLACK and a BLACK with GREEN STRIPE
wire. Run a jumper from the BLACK with GREEN STRIPE wire in the 2 wire
connector to the LIGHT BLUE with BLACK stripe wire on the multi-wire
connector. That's it! Your fog lights will come on when you turn them on
(parking lamps must be on, at least) and will stay on with low or high
beams.

http://users.jnlk.com/dakrt/foglamps.htm

- Alex

• Next message: Pilot.dog: "Intro, and a question or two"
• Previous message: Alex Harris: "RE: Poboy Intake; Filters, Parts, and Such"
• Next in thread: Tim J Koth: "Fog lamps on with high beams"
• Maybe reply: Tim J Koth: "Fog lamps on with high beams"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:41 EDT