Kyle:
I did the same thing recently, had to call Summit to find out the diff
between the 0920 and the 0810. I got the 0920 with the 3.5" ID flange so it
would clamp on over a 3" PVC pipe, which has a 3.5" OD.
The OD of the air hat flange is 3-1/8". For the PVC-to-airhat fitting I got
a stainless clamp from a plumbing supply store. The clamp has a dual-size
rubber lining that is made to fit 3" PVC (3.5") on one side and 3" copper on
the other (3-1/8"). People seem to have had success with the all-rubber pipe
coupling you can get at Home Despot or wherever also. Both clamps are about
the same price, $7 or so.
The best picture I've seen of this setup is at:
http://users.jnlk.com/dakrt/Homemade2.htm
Have fun! E-mail me with Q's!
- Alex
> So what now? I was set on just getting a 6"x"9 cone. If you look at this
> specs, there are two filters with the SAME specs, atleast it appears that
> way. Part number RE-0920 which is $36.95 is a 6"x9" cone and part number
> RE-0810 is $46.95 and is also a 6"x9" cone. Why the $10 price
> difference???
> Well once again I called Summit and they told me the ONLY different is the
> inside diameter, one the 0920 having the 3.5" ID mounting flange and the
> 0810 having the 3" ID mounting flange.
>
> The GenIII stock air hat's ' pipe hole' is 3" right? Is this
> number 3" for
> the inside diameter or 3" for the outside diameter.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:41 EDT