> I did the same thing recently, had to call Summit to find out the diff
> between the 0920 and the 0810. I got the 0920 with the 3.5" ID flange so
it
> would clamp on over a 3" PVC pipe, which has a 3.5" OD.
>
> The OD of the air hat flange is 3-1/8". For the PVC-to-airhat fitting I
got
> a stainless clamp from a plumbing supply store. The clamp has a dual-size
> rubber lining that is made to fit 3" PVC (3.5") on one side and 3" copper
on
> the other (3-1/8"). People seem to have had success with the all-rubber
pipe
> coupling you can get at Home Despot or wherever also. Both clamps are
about
> the same price, $7 or so.
>
> The best picture I've seen of this setup is at:
>
> http://users.jnlk.com/dakrt/Homemade2.htm
Alex,
Thanks a ton for the info, I really appreciate. I will let you and everyone
else know how things turn out. Still rounding up parts and ordering part, so
I wont have it built and 'tested' anytime soon. Probably looking at next
weekend. Thanks,
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:41 EDT