Re: MP Computer installed

From: Jpm699 (Jpm699@email.msn.com)
Date: Mon Aug 28 2000 - 21:46:56 EDT


You know it is required to use 92 octane with this computer, you might want
to switch now. I use it in mine and never once had pinging.

Jason

> My MP Comp arrived Thursday at lunch and was installed 5 minutes later.
> After about 5 miles, it was beginning to shine and now, after about 50
miles
> is running very strong. I picked up quite a bit of ping under load in
> 2200-2600 RPM range, but I'm still running 87 octane gas. And, the weather
> was mid 90's with about 500 lbs of payload, A/C on and climbing a decent
> hill. Next step will be to install a set of 3923 plugs and if that doesn't
> eliminate it completely, I'll start upping the octane. I'm pretty
confident
> I will be able to tow with this computer once I'm finished with it and
still
> be able to light up the tires.
>
> On a side note, by bog/flat spot in the 2300-2900 RPM range is gone. The
> truck runs stronger and much smoother than with the stock computer.
>
> All I have to do now is get the VIN and mileage flashed.
>
> John
> 98 Dak 4X4 CC Sport, 5.2L, Auto, Mopar headers and Computer, F&B TB, Accel
> coil, Gibson
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:45 EDT