Get a Hughes Engines cam, you can send yours back as a core and get a new
one for about $187 and get a lot more performance! The HER0814al shoud work
great in a stock engine.
http://www.hughesengines.com/cams/magnumlist.asp
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 99.52 mph
360ci, 5-spd, 4.11 LS, Ram-air
----- Original Message -----
From: "Robertsons" <jrobert@voyageur.ca>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, August 29, 2000 11:05 PM
Subject: DML: Magnum Camshaft
> OK, I got this 96 5.2L magnum which I'm freshening up to go into my 92
Dak.
> I tear it all apart and everything is good accept the cam. The engine had
> been sitting for about 3 months and because the humidity up here (Northern
> Ontario) has been so high the camshaft has some rust on some of the lobes.
> Not all the way around, just one some spots. I took crocus cloth (very
> fine sand paper) and cleaned up the spots but you can still see small dark
> spots were the rust was. Question is should I run it like that or replace
> the cam. I did phone the local dealer and they told me that I can't even
> get a performance cam in Canada and if I could it would be around $400
> bucks! Somebody on the list had a cam for sale about 6 months ago.
Anybody
> know who?
>
> Dave R
> 92 Dak 5.2
> 71 Demon 340
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:49 EDT