the R/T magnum cam for the 5.2 and Crane cam compucam
with a 2030 Grind is the same lift and duration but
the Crane runs about $100. ameriacan less that Mopar
Frank 94 5.2 spoRT
http://members.onecenter.com/autoworld/dakota/index.html
but i think Mike D had a cam for sale
--- Robertsons <jrobert@voyageur.ca> wrote:
> OK, I got this 96 5.2L magnum which I'm freshening
> up to go into my 92 Dak.
> I tear it all apart and everything is good accept
> the cam. The engine had
> been sitting for about 3 months and because the
> humidity up here (Northern
> Ontario) has been so high the camshaft has some rust
> on some of the lobes.
> Not all the way around, just one some spots. I
> took crocus cloth (very
> fine sand paper) and cleaned up the spots but you
> can still see small dark
> spots were the rust was. Question is should I run
> it like that or replace
> the cam. I did phone the local dealer and they told
> me that I can't even
> get a performance cam in Canada and if I could it
> would be around $400
> bucks! Somebody on the list had a cam for sale
> about 6 months ago. Anybody
> know who?
>
> Dave R
> 92 Dak 5.2
> 71 Demon 340
>
__________________________________________________
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:49 EDT