>
> My questions:
> 1. Will I get any benefit out of the Accel coil without the MSD, or
> should I wait until the MSD goes in and keep the stock coil for now?
I did, idles smooth as silk
>
> 2. I understand that the 3923 Autolites are the plug of choice, does
> this still apply to a stock engine that isn't used for racing?
they shouldn't be a problem, although I'd run a 3924 in your application.
the 3923's don't foul up in my truck, but I tend to dog on it fairly
regularly. either way the plugs are cheap, wouldn't hurt to try the 3923's
and change them often
>
> 3. Stock plug gap for '95 was 0.035. With the MSD wires and Accel
> coil, can / should I open that up a bit?
w/ the wires and coil I gap mine at .045"... you may want to start at .040"
>
> Thanks in advance for any advice.
>
>
> =====
> ---------------------------------------------------------
> Jason Bleazard http://www.bleazard.net Toronto, Ontario
> his: '95 Dakota Sport 4x4, 239 V6, 5spd, Reg. Cab, white
> hers: '98 Dakota Sport 4x4, 318 V8, Auto, Club Cab, black
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Mail - Free email you can access from anywhere!
> http://mail.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:50 EDT