I'm in the process of heads/cam now... Mopar makes aluminum heads, but at
around 1100 bux a pop. as far as power increase... well I'll let everyone
know after it's installed and dyno'ed ; )
_______________________
Jon Smith--Raleigh, NC
jon@fast4x4.net
www.fast4x4.net
----- Original Message -----
From: <Pukeloser@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, September 13, 2000 8:46 PM
Subject: DML: opininions on cam,MP intake heads, and TB
> Hey everyone,
>
> I have a '95 CC 318 3.92 lsd with headers, exhaust, MSD
ignition/coil/wires,
> MP PCM, K&N filter. I am going to do the cam and heads so I figured I
might
> as well get a performance throttle body and the MP single plain intake
> manifold plus some matched injectors.
> I was wondering if anyone makes aluminum heads for the 5.2 magnums and
what
> kind of cam to get for excellent torque and power. I figure I'll need the
TB
> and intake with cam and heads. does anyone know what kind of torque/ power
> increase I should be able to get?
>
> JOHN
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:33 EDT