Jon,
I'm running the Hughes HER0612AL. It runs extremely well with this cam.
I'm real anxious to see how it does in the emissions test. If I have enough
cushion after the test, I may be tempted to go a step larger.
Rich
-----Original Message-----
From: Jon Smith [mailto:jon@fast4x4.net]
Sent: Wednesday, September 20, 2000 7:52 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Re: RE: Speaking of Redline was:R/T question
That's great news Rich, what cam are you running? I have to have the heads
in Charlotte Saturday morning (3hr drive) and be back down here for work at
noon (another 3 hrs) all while blazing the highways and byways in mom's '86
S-10 blazer, thankfully it has the earth pounding torque of the mighty 2.8
ltr v6.
Seriously tho, I hope to have everything done in 3 weeks. The heads should
take a week, and after that I'm just waiting on parts to come in. Dave
Hughes *should* have the timing chain and springs, etc in this week
(hopefully), a few more misc items and she'll be back on the street.
I'm still considering a swap to '92 fuel system to get a return fuel line
and adjustable fuel pressure.
14s or bust =)
_______________________
Jon Smith--Raleigh, NC
jon@fast4x4.net
www.fast4x4.net
> Jon,
> No, haven't taken it apart yet. It's running great! I know it is fine
> though. It idles just as sweet (aside from the lope of the cam), highway
> crusing is flawless, no hesitation or missing. Actually when the dyno
runs
> were made, I had the tech run it up to 6000rpm. No problem; the graphs
also
> show it. Frank Golembieski came down for the run. He can tell you how
well
> it performed.
>
> I'm in the middle of replacing my muffler right now. (Man, its hard to
get
> the pipes off without damaging them.) Need to take the Dak in tomorrow
for
> a bad sensor, and get my emissions test also. After this, the heads are
> coming off for the 3-angle valve cut and deburring. If you want me to
look
> at anything specifically for you, just let me know. By the way, how are
you
> making out with your headwork. Have you been delayed also?
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:40 EDT