Re: rant: why Crower sucks

From: Gmblows@aol.com
Date: Sat Sep 23 2000 - 10:04:54 EDT

Next message: Gmblows@aol.com: "Re: Re: Bought a 360"
Previous message: Rick Lewis: "Latest software update for your PCM"
Maybe in reply to: mike d.: "rant: why Crower sucks"
Next in thread: mike d.: "Re: rant: why Crower sucks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Why can't you use the 1.6 Crowers?

<< The cam's Part number is 604. It doesn't actually have .604 lift.
  Here are the cam's specs:
COMPETITION CAMS CAMSHAFT SPECIFICATION SHEET

PART # 20-604-8
GRIND NUMBER: CRS264HR-12
ENGINE: CHRY SML BLK 273-360
                                         INTAKE EXHAUST

VALVE ADJUSTMENT HYD HYD
GROSS VALVE LIFT .512 .512
  .006 TAPPET LIFT 264 274
VALVE TIMING OPEN CLOSE
AT .006 INT 24 BTDC 60 ABDC
          EXH 73 BBDC 21 ATDC
THESE SPECS ARE FOR CAM INSTALLED
AT 108 INTAKE CENTER LINE
                                     INTAKE EXHAUST
DURATION AT .050 210 220
LOBE LIFT .3200 .3200
LOBE SEPARATION 112

I'll be more specific from now on =)

-miggity
>>

Next message: Gmblows@aol.com: "Re: Re: Bought a 360"
Previous message: Rick Lewis: "Latest software update for your PCM"
Maybe in reply to: mike d.: "rant: why Crower sucks"
Next in thread: mike d.: "Re: rant: why Crower sucks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:44 EDT