Re: 4.7 intake

From: Andy Levy (andylevy@bigfoot.com)
Date: Tue Sep 26 2000 - 21:34:52 EDT

Rob,
        I'm not talking about the filter to TB tube. I was referring to the
tube that feeds the "cold air can."

Rob Parenti wrote:
>
> Andy,
>
> The Intense intake tube is 3" O.D. The cross section area of the throttle
> body is a *lot* smaller, but I don't know the actual number. The Intense
> solution gets you lots of air, it just doesn't get you the cold air. But if
> you're talking about money, you're right - it's a lot cheaper to get some
> plastic elbows and pipe, or staying with stock. The stock 4.7 air hat has
> suprisingly smooth lines inside.
>
> - Rob
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Andy Levy
> Sent: Tuesday, September 26, 2000 5:21 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: 4.7 intake
>
> Looks are one thing. Results are quite another. Look at that Intense
> carefully. You're taking a large filter capable of flowing a LOT of
> air, and feeding it through a straw. You may as well save your money
> and keep the stock setup. Run that setup for a year, pull off the
> casing, and look at where all the dirt is - right where the hose lets
> out. 

-- 
-andy

http://home.twcny.rr.com/andylevy/ --- andylevy@bigfoot.com 
-------------------------------------------------------------
"We like AMD. The enemy of our enemy is our friend."
              --- Jonathan Schwartz Sun senior vice president
-------------------------------------------------------------

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:52 EDT