Hmmm.....let me think about this....alternator fuse blew....ok....sounds
like maybe your MSD wires are okay, when you went to junction box you
matched red to red and black to black? Sounds more and more like maybe you
might have hooked up your battery backwards when you put it back in?
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Ronald Wong
Sent: Saturday, September 30, 2000 12:36 AM
To: dakota-truck@buffnet.net
Subject: DML: RE: Re: RE: MSD install help (kinda long)...
This is what you said:
<<snip>>
The big black wire (MSD to Battery positive) was hotter
than
> HELL.
>
> Disconnected the big red (MSD to Battery Negative) wire from the hot post
in
> the fusebox,
<<snip>>
The MSD black wire should go to battery negative.
The MSD red wire should go to battery positive.
Just exactly like your battery cables, red to positive and black to
negative. Did you wire your battery backwards too?
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:06 EDT