Hmmmm...sounds like my old instructions. ;)
It's located on the intake manifold on the passenger side front. (Brass
Plug). If you remove/relocate it, you'll need a 1/4" NPT Pipe Plug (Home
Depot carries these) to fill the hole. Drill a 1/2" hole in your intake
tube and thread the IAT sensor in there.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of jay & dana
Sent: Wednesday, October 04, 2000 5:53 PM
To: DML
Subject: DML: IAT sensor
Could someone please explain to me what the IAT sensor is, where it is
located, and what is it's purpose? On a webring with the K&N FIPK they said
to relocate this sensor 6 inches away from the throttle body. Why would
this help and how would you go about this mod?
Thanks
Jay
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:48 EDT