The Inyati/Line-x guy told me this as well (about the troughs filling up.).
I haven't seen any cutouts but it sounds logical.
Lance
At 04:29 PM 10/5/00 -0600, you wrote:
>Russel-
>
>I think I remember hearing that at least ONE diff between Line-X and others
>is that Line-X is sprayed on hot and is hard within 3-5 seconds, whereas
>others are sprayed on *wet* and they have to dry. I've seen cutouts (from
>5th wheel installations) from Line-X beds side-by-side with cutouts from
>others, and one of the effects of the hot application (and quick set) is
>that there is *no* pooling in the troughs. The coating is as thick on the
>ridges as it is in the troughs. I'd say that's pretty important, as the
>ridges are where you'll see most of the wear if you haul anything.
>
>I have a Mopar under-the-lip liner that I bought with the truck, so I can't
>speak to issues of fade or durability. I *will* eventually swap that out
>for a spray-in liner -- I don't like the abrasion/rust thing that is going
>on with the snap-in liner. I'm gonna do the Line-X.
>
>Grady Ogburn
>'98 Sport CC 4x4
>5.2l, 5 Speed
>Mesa Headers & Cat
>K&N FIPK, JET PCM
>Gibson/MagnaFlow "FrankenPipe" Exhaust
>Leer Topper
>
>----- Original Message -----
>From: "Russell K. Yee" <rkyee02@hotmail.com>
>To: <dakota-truck@buffnet.net>
>Sent: Thursday, October 05, 2000 11:11 AM
>Subject: Re: DML: Spray-in Bedliner - Rhino? Line-X? D-I-Y Herculiner?
>Durabak?
>
>
>> What's the difference between brands of spray-on liners, say between
>Line-X
>> and Rhino? On average how much does it cost? I am looking for an
>> alternative to my existing drop in for my 2k CC and am wondering how much
>> dough I would have to drop to get my bed lined under rail. Thanks
>>
>> Russ
>>
>> ----- Original Message -----
>> From: "Woodruff, Jason P" <Jason.Woodruff@West.Boeing.com>
>> To: <dakota-truck@buffnet.net>
>> Sent: Thursday, October 05, 2000 12:07 PM
>> Subject: RE: DML: Spray-in Bedliner - Rhino? Line-X? D-I-Y Herculiner?
>> Durabak?
>>
>>
>> >
>> > From what I've red in a magazine they said most manufactures colors will
>> > fade, so they suggest colors that complement not match. There are
>> coatings
>> > to prevent UV fading, but I think they would get scraped off. There are
>> > also different compounds that theoretically don't fade. This magazine
>> said
>> > that colors will turn "yellower". Like black turns grayish, blue turns
>> > greenish and white turns yellowish. What would yellow turn? It might
>be
>> > worth asking around some more. I'm suppose to get a deal through a
>friend
>> > of a friend for a Rhino at under $300, we'll see if that comes true.
>> >
>> > Jay
>> >
>> > > Date: Thu, 05 Oct 2000 08:36:27 -0400
>> > > From: Jack Hilton <hemi@charter.net>
>> > > Subject: Re: DML: Spray-in Bedliner - Rhino? Line-X? D-I-Y Herculiner?
>> Du=
>> > > rabak?
>> > >
>> > > So which custom color did you get ? Every dealer I have talked to says
>> th=
>> > > at
>> > > no matter what you do, the custom colors will always end up fading and
>> > > getting nasty, and they are more expensive. They always try and talk
>me
>> o=
>> > > ut
>> > > of it. I would like a matching liner for my Solar Yellow R/T.
>> > >
>> > > Thanks!
>> > >
>> > > James Brown wrote:
>> > > I got a custom color and went over the rails so I paid about $475
>> > >
>> >
>>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:50 EDT