No grease and no dirty motor oil. Use some clean motor oil or (preferred)
ATF. Put a VERY LIGHT coat around the rubber o-rings.
- Bernd
> They're here!!! I basically know about the bleeder, throttle linkage, etc.,
> but do I lube the o-rings with anything before installing? I'm thinking white
> lithium or motor oil. Any advice?
> They're from Jegs @ $193/set, came in a white Ford Racing box with a
> hand-written p/n M9593-C302, they're blue with a 4-hole nozzle. Called Jegs
> because of the hand-written #, but they said Ford outsources them & they're
> not always the same color (fellow DMLer Greg has orange ones). I plan to do
> this job Saturday, weather permitting. Any advice would be appreciated.
>
>
> Kevin/NJ
> 99 CC 5.2L 2wd auto
> R/T clone that can tow! :)
> always addin' more...
> check it out: <A HREF="http://members.aol.com/quiktruk99/DARKDODGE.htm">THE
> DARK DODGE</A>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:56 EDT