That's what I meant, Sir Ratsch!
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bernd D. Ratsch
Sent: Tuesday, October 10, 2000 3:13 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: RE: belly Pan Gasket
Nothing...GOOD. Oil...BAD. :(
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Ronald Wong
Sent: Tuesday, October 10, 2000 4:42 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: belly Pan Gasket
Oil, yes, bottom of manifold.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Ken Hoffman
Sent: Tuesday, October 10, 2000 3:34 PM
To: dakota-truck@buffnet.net
Subject: DML: belly Pan Gasket
Bernd,
You just mentioned that you looked down into your manifold and ......uh oh
----What's uhoh = ?? Oil, coolant ? Also, this may seem silly, but
what does the "belly pan" do?
Is it just the bottom of the intake manifold?
BTW, thanks for everyones (and Bernd) input re the Fabtech lift kit ----
I decided to go for it and should have it in this Sat ( I'm doing it
myself)
Regards,
Ken H.
So Cal
"The shortest distance between two points is a straight line"
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:56 EDT