FYI - Jon said all that without *any* queuing from his trainer, folks!
hehe
At 10:26 AM 10/11/00 -0400, you wrote:
>only way to lower the front is to loosen the torsion bars... not something
>you'd want to do. Not sure why you'd want to lower a 4x4, but I won't ask
>; ) Putting the traction bar on top would be a bad idea, limiting the
>amount of compression which would lead to bottoming out on the bar, which
>would quickley break something...
>
>when the bar is underneath the axle, the wrapping action will try and lift
>the bed, which in turn plants the tires, thus the added traction.....
>
>_______________________
> Jon Smith--Raleigh, NC
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Jack Hilton III
www.CyberMopar.com
www.HellaUSA.com
www.DakotaRT.com
www.Dakota-Truck.com
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:58 EDT