Matt... I'm barely pushing 9PSI in my 318, I have about 400-450HP at the
crank (est.)
I think 25PSI would give some awesome results... but you may need about 6:1
compression ratio =-)
Hmmmmm.... Lower compression pistons, higher boost = nightmare dak =)
_________________________
Tim Berry (97 Dakota Club Cab)
Chesapeake, VA
Best 1/4: 13.50@101.91
> Well Bill, add a turbo with 25 lbs of boost to a 4.7L, maybe not 800 HP
but
> it'd be way up there around 50 hp per cylinder. Where can I get one???
> Hee hee.
>
> Matt
>
> > -----Original Message-----
> > From: SEMIHEMI01@aol.com [mailto:SEMIHEMI01@aol.com]
> > Sent: Tuesday, October 17, 2000 9:16 AM
> > To: dakota-truck@buffnet.net
> > Subject: Re: DML: Mopar Muscle (or Action, I forget) Mag
> >
> >
> > Matt,
> > If we could get 100/cyl. we'd be untouchable. 287ci
> > pulling 800. WOW
> >
> > SEMIHEMI01 (Bill C.) 2001 QC, 4.7L, 5spd. 3.55 LSD, K-N +
> > Cool-Air, SilBlades,
> > 10w-30 MOBIL 1, 180 T'STAT, GIBSON 3" Single Side-Swept
> > cat-back, G-TECH,
> > <A HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:07 EDT