I think that .060 over will get you about 348ci with a 4" stroke. Get
yourself a 360 block and you can get up to 408ci.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
360ci, 5-spd, 4.11 LS, Cowl-induction
----- Original Message -----
From: <Pukeloser@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, October 25, 2000 2:40 PM
Subject: DML: ? on stroker crank for 318
> Hey everyone,
>
> Does anyone know what the specs would be for a crank to change the
stroke
> in my 318. I have decided that running a crate motor is going to be too
much
> fabrication (if I want the 380hp one). So I'm trying to figure out how
many
> cubic inches I can get out of the 318 block if I bore and stroke it. I'm
> guessing it'll be around 400ci. This way I can get a mildly aggressive
cam,
> aluminum heads, and the single plane intake with a quick D throttle body
and
> not runinto problems with the computer and fuel injection (other than
getting
> larger injectors)
> JOHN
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:25 EDT