Uh oh, he wants a professional.....that means the King.....paging BERND, yo
BERND!
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Hugh Catlett
Sent: Sunday, November 05, 2000 12:11 PM
To: dakota-truck@buffnet.net
Subject: DML: Some performance questions
I need some professional advice please.
I just replaced my thermostat with 180 degree model and the OE plugs with
Autolite 3923's. I also reset the ECU. I also pulled one of the plugwires
out of its plug connector.
I think that the plugwire I screwed wasn't satisfied with my repair attempt.
Because now after about 15 miles I have a noticable shake in the engine at
idle and the "Check Engine" light has come on. Is there anyway to tell if
that plugwire is the problem? This is a 98 5.2L Auto 2WD DAK.
I'll try to re-repair the plugwire and then how do I kill the check engine
light?
As an aside - what is the recommended gasoline to use, brand and octane
rating?
Thanks for your help.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:06 EDT